How to Make Glamorous Sunburst Wax Seals

A little burst of colour inspired by the vibrant underwater world. ✨ With shimmering glitter, crystal-clear GLAX and a touch of gold, our Sunburst Shell wax stamp creates a jewel-like seal that catches the light beautifully.
In this tutorial, we layer a glitter-filled clear seal over black sealing wax. The dark background brings out the shifting colours, while a golden finish highlights the shell’s intricate details.
Materials you’ll need
- 3D Sunburst Shell Wax Stamp
- GLAX Crystal-clear Glue Sticks
- High-temperature Glue Gun
- Iridescent Glitter
- A Silicone Mat or Baking Sheet
- Black Sealing Wax and a suitable melting tool or separate glue gun
-
Gold Seal Cream for the finishing touch (optional)
- An envelope or card to decorate

Step 1: Prepare your materials
Heat your GLAX in a compatible glue gun, set the glue gun to high temperature (210°C/ 410°F) . Wait at least 8 minutes for the glue gun to reach the optimal temperature, and have your stamp and glitter ready.
Prepare the black sealing wax separately so it is ready for the layering stage.
Step 2: Scatter the glitter
Use a small spoon to sprinkle glitter onto the silicone mat, keeping it in a compact area approximately the size of your seal.
Step 3: Add the crystal-clear GLAX
Dispense a small pool of melted GLAX directly over the glitter. Add enough to capture the shell design when pressed, allowing a little room for the glue to spread.
Step 4: Press the Sunburst Shell stamp
Place your stamp straight into the warm GLAX and press firmly and evenly. Leave it in place until the clear layer is firm enough to lift from the mat without stretching.
For the layered technique shown in the video, keep the clear glitter seal attached to the stamp as you lift it. You will use the stamp to transfer it onto the black wax.

Step 5: Create the black wax backing
Dispense a quarter size of black sealing wax onto your envelope where you would like the finished seal to sit.
While the wax is still soft, lower the stamp -with the clear glitter layer still attached—into the centre. Press gently so the black wax spreads beneath the clear layer and forms a border around it.
The black backing makes the glitter’s colours appear richer and more vivid.
Step 6: Let it cool, then reveal
Allow the layers to cool and set before gently lifting away the stamp.
You should now have a clear, shimmering Sunburst Shell framed by black wax. Take your time with this step: if the stamp resists, give the seal a little longer to cool.
Step 7: Highlight with gold
For the finishing touch shown in the video, pick up a tiny amount of gold seal cream with your fingertip or a small applicator. Lightly sweep it across the raised shell details.
Start with very little and build gradually. Keeping the gold on the raised design allows the glitter beneath to remain visible.
A little light, a little colour
Tilt your finished seal towards the light and watch the glitter shift through shades of gold, coral and green. Each seal will be slightly different, depending on how the glitter settles.
We love this combination on softly textured paper, where the sparkling shell becomes a small, unexpected treasure - a lovely detail for a special card, a hand-delivered invitation or a thoughtfully wrapped gift!


You can use the same technique to create a Goldfish Pond and fireworks-style seal! Check out our Instagram video here.
